10289 - Wet Dynabug "Model T" Orbital Sander
Dynabrade
DYN10289
Wet Dynabug "Model T" Orbital Sander - Self-Siphoning.
Includes 20 ft. (6 m) of water hose, siphon weight with replaceable water filter and foam interface pad.
Ultra-lightweight, just over 1 lb (.5 kg)! Stainless steel components never rust.
20,000 RPM tool never needs oil!
Easy-adjust water valve with on/off and fast/slow selection.
Fast, smooth and uniform surface preparation; reduced labor time.
Our unique water feed through-the-pad design allows use of standard round wet paper with holes. No special sand paper or hole punch needed!
Up to 3/16" (5) diameter orbital action with adjustable speed control.
Includes standard 5" Hook-Face Pad (58086) and soft 5" Interface Pad (53978). Interface pads available for contours.
Soft foam increases conformability, allowing operator to easily follow contours. Converts standard pad into a fine finishing and finessing pad! Attaches between sanding pad and hook in loop abrasive.
Pad Mounting Style 4 Screws
Orbit Inch (mm) 3/16" (5)
Free Speed RPM 20,000
Exhaust Type Rear
Max. Air Flow @ 90 PSIG: SCFM (L/Min.) 9 (255)
Hose I.D. Size Inch (mm) 1/4" (6)
Length Inch (mm) 5" (127)
Height Inch (mm) 3" (76)
Sound Level dB(A) 76
Vibration Tool Peak Axis ISO8662 (m/sec²) 2.9 10288 | 2.3 10289
Pad Mounting Style 4 Screws
Orbit Inch (mm) 3/16" (5)
Free Speed RPM 20,000
Exhaust Type Rear
Max. Air Flow @ 90 PSIG: SCFM (L/Min.) 9 (255)
Hose I.D. Size Inch (mm) 1/4" (6)
Length Inch (mm) 5" (127)
Height Inch (mm) 3" (76)
Sound Level dB(A) 76
Vibration Tool Peak Axis ISO8662 (m/sec²) 2.9 10288 | 2.3 10289